FiberShield® fabric protectant
What is Fiber-Shield®?
Fiber-Shield ® is a blended penetrating mixture of specialty polymers contained in a waterborne, or petroleum carrier - (Simply a means of uniformly "delivering the polymer system") designed to protect fabrics and carpeting from waterborne, oilborne and soilborne elements.
How does Fiber-Shield® work?
Fiber-Shield ® is applied under pressure at 40 psi. Once applied you can expect a dry time of approximately 3 hours (under normal humidity), and a CURE TIME of 24 - 72 hours. During this time Fiber-Shield® works its way from the top to bottom of every fiber, coating, expanding, removing air spaces. This makes a spill or soil less likely to penetrate and stain the fibers, and therefore can be easily removed.
Fiber-Shield® - where is it applied?
  • 1. On site - client’s home
  • 2. Off site - Our cleanroom/warehouse
Is Fiber-Shield® safe around pets and children?
Yes, Fiber-Shield ® is a green product and is safe for pets and children**. Containing no harmful additives, Fiber-Shield ® is blended in a controlled environment under strict quality control standards. All batches have retained samples which also affords the benefit of "NO" technician error, (no mixing required).
How long after application does Fiber-Shield® begin to protect the textile?
The protection and drying cycle starts within minutes after initial drying, increasing significantly after 24-hours, and reaches maximum stain repellency after 72 hours. Treated surfaces may be used once they are dry to the touch (normally 1 - 4 hours at normal room temperature).
Does Fiber-Shield® block sun and UV rays?
No, though Fiber-Shield® can help to protect your fabrics from sun and UV, it is not designed to block the sun’s rays or UV rays in that capacity. We recommend utilizing window tints and or curtains which can block 90% of sun and UV rays.
How long does Fiber-Shield® last once it is applied?
It varies on overall use, wear and traffic; however, you can expect Fiber-Shield® to provide optimal protection for several years after application.
Is Fiber-Shield® non-toxic?
Yes, Fiber-Shield® is non-toxic and safe for pets**.
Is Fiber-Shield® hypo-allergenic?
Yes, Fiber-Shield® is hypo-allergenic**.
Is Fiber-Shield® non-flammable?
Yes, Fiber-Shield® is non-flammable, does not change the fire-retardant rating of the treated item, and in many cases can retard or delay the onset of a flame on exposed fabrics or textiles that have been treated with Fiber-Shield ®.
How is All Clean and Fiber-Shield® different from it's Competitors?

 How All Clean Fiber-Shield® compares to the competition

Territory Products Cleaning Warehouse Services
Fiber-Shield® textile protectant for rugs, upholstery, leather and more Our company covers all territories OMS for sensitive textiles (S Rated) full service cleaning yes full time certified technicians
will travel in-state out-state Water-based for WS rated textiles furnishing, draperies rug cleaning -
- - area rugs all fabrics -
- - blocking area rugs Fiber-Shield®
application
-
- - FiberShield® application pre-treatment -
 
 Territory Products  Cleaning  Warehouse  Services
COMPETITOR 4 different franchises to cover territories OMS waterbase none none outsourced to 2nd party company
How long does it take for Fiber-Shield® to dry?
Average dry time is 1-3 hours, cure time is 24 - 72 hours. Surface may be used after 3 hours of dry time.
* Textile means fabric or carpeting
** When dry

IMPORTANT: Fiber-Shield® provides an invisible, odorless protectant that repels dirt, oil, alcohol and water based stains (excluding bleaches, acids, dyes and other extreme or unusual conditions). Fiber-Shield® will give some safe time but can never guarantee 100% against damages to valuable furnishings, area rugs and carpeting.